
Dust off your evidence board (and your trench coat, if you want) because it’s time to play detective. There’s a cold case to solve, and you have a suspect, a theory, and a motive. Your suspect was spotted all over town, and you’ve got security footage to review.
A few hours later, every camera sighting fits into your timeline. You’ve retraced their steps and connected the dots. As far as you’re concerned, your case is undeniably airtight.
But wait. Why does the timestamp on the camera outside the crime scene show your suspect leaving before the crime even happened? And why does another camera’s timestamp place them across town before they supposedly left the previous location? If the cameras aren’t keeping the same time, how can you be sure you’ve connected the right pieces of evidence?
Believe it or not, the whole “timestamp” debacle is also a challenge for quantum networking researchers. Their margin of error, however, has less to do with proving something beyond a reasonable doubt and more to do with getting the timing right down to trillionths of a second.
Quantum networking connects quantum devices in different places so they can share information. Unlike networks carrying our texts, photos, and emails, quantum networks use special properties of tiny particles of light called photons to make new kinds of communication possible.
Why go to all this trouble? Researchers hope these connections could enable new forms of secure communication and allow quantum computers in different places to work together.
Sending delicate quantum information over long distances is already a challenge, since it can be easily disturbed or lost along the way. (More on that challenge here.) Timing is just as critical, though.
Scientists can create pairs of photons with a special connection that remains when they’re sent to different locations. Researchers want to use these relationships so quantum devices far apart can communicate and work together.
When photons arrive, equipment at each location records when they’re detected. But researchers have to figure out which detections came from the same pair.
And to do that, the timing records from those locations have to line up. If their timing is off, researchers could compare photons that weren’t actually connected or miss relationships they were looking for.
The evidence checks out … with a catch.
Like any quality investigation, researchers need a reliable timeline before they can confidently connect evidence from different locations. To align these timelines within trillionths of a second, quantum researchers often use something called a White Rabbit Switch. (Yes, that’s really what it’s called. No, you aren’t drifting into an Alice in Wonderland fever dream.)
The White Rabbit Switch acts as a central timing reference, using dedicated connections to keep clocks at different locations synchronized and making tiny adjustments to prevent drift. And it actually works quite well!
There is, however, a practical complication. (I know, you’re shocked!)
Think about your laptop. It probably has a handful of ports for connecting other devices. Let’s say it has four.
Now, let’s say your laptop is the White Rabbit Switch, and every device plugged into a port represents another location on the quantum network. Each location needs its own connection, but you only have four ports. What happens when you need a fifth? Or a sixth? Or a twentieth?
Sure, you could add more equipment. But every new location still needs its own dedicated cable connecting it to the central timing system. As the network grows, so does the infrastructure required just to keep everyone on the same clock. What happens when those locations are miles apart? Or when running a dedicated timing cable isn’t practical?
The case has a new lead.
Researchers at the University of Tennessee at Chattanooga wanted to know if there was a way around those dedicated timing connections. Their idea involved miniature atomic clocks, small electronic devices that use the steady behavior of atoms to keep extremely precise time.
Unlike White Rabbit, these clocks can operate independently. But could they remain accurate enough for researchers to make sense of quantum measurements recorded miles apart?
To investigate, the team first synchronized the clocks, then separated them across Chattanooga’s fiber network and let them run on their own. Even these super-precise clocks, however, gradually drifted apart.
Remember your security footage? Two cameras whose timestamps initially line up perfectly may slowly grow farther apart as the recordings continue. Even if their clocks agreed at the beginning, you can’t assume they’ll still agree hours later.
UTC researchers faced a similar problem. By examining patterns in the photon detection data, they could track how the timing relationships shifted as the clocks drifted apart. They then used software to correct those differences when analyzing the measurements.
Of course, the real test was whether they could still recover the quantum behavior they were looking for.
They tested their approach across three locations on Chattanooga’s fiber network, without using dedicated connections to keep the clocks synchronized. They successfully observed quantum interference, with results comparable to White Rabbit. According to the team, this was the first time quantum interference had been observed across a deployed citywide fiber network without dedicated timing links.
In other words, it worked!
Undergraduate students at UTC also participated in the research, gaining hands-on experience with the challenges of developing quantum technologies. This experience is an important part of UTC’s effort to prepare students for careers in an emerging field, where understanding the science is only part of the job.
Chattanooga gives UTC researchers and students an opportunity to test quantum technologies on infrastructure already operating beyond the laboratory. By testing a different approach on an existing fiber network, the researchers demonstrated a way to remove one of the infrastructure constraints on connecting more locations.
This lead may take the investigation off the map.
Three locations across Chattanooga are just the beginning.
Without requiring every new location to connect to a central timing system, researchers could have more freedom to build quantum networks spanning cities, research facilities, and much greater distances.
The internet became much more useful as it expanded to connect people around the world. Researchers envision a similar expansion for quantum networks, potentially enabling more secure communication and allowing quantum computers in different places to work together. For the rest of us, that could mean better ways to protect bank transactions and medical records, or more powerful computing tools for scientists developing new medicines and materials.
Those connections could reach some interesting places. There’s dark fiber, which sounds mysterious but is just fiber-optic cable that isn’t currently being used. Imagine putting more of those existing cables to work connecting quantum devices across cities and regions, without necessarily building entirely new networks from scratch. Then there are aircraft and satellites, where physical connections present an entirely different challenge. (Good luck running a timing cable to space!)
Of course, there’s still investigating to do before quantum networks can operate on that scale. With this approach now demonstrated on Chattanooga’s fiber network, UTC researchers have a foundation for pursuing more advanced quantum networking experiments, including moving locations and more complicated network configurations.
As for your cold case, perhaps those mismatched timestamps weren’t the dead end you thought they were. Once you know how the clocks disagree, you can piece together the evidence and get your investigation back on track.
The question now is how far researchers can take it. And that’s a whole new case to crack.
